Nothing is more precious to a homeowner than shapely lawn, and your lawnmower with sharp blades in the tool that helps you give it just right finish. When the blades become too knackered, they tear at the grass instead of cutting it cleanly, leaving brown margins that can turn into fungal infection. In contrast, sharp blades create nice clean and quick cuts that result in a healthy thick lawn. If you are not sharpening your lawn mower blades properly, then the new and fancy lawnmowers could turn out to be a white elephant.
Warning Signs You Need to Sharpen Your Lawnmower Blades
Uneven Cut: Dull blades may not be able to provide sharp cutting edges when your lawn shows uneven cut grass with some strands longer than the others. Blades such as this, like any other in production, did not cut entirely uniformly.
Torn Grass Tops: Inspect the grass tops a few minutes after mower. If your blades only produce a ripped effect (see above), then it is most likely that you need to sharpen the cutting tips. Torn grass frequently turns brown as seen on the damaged patch.
More Time: If you find yourself needing to make the same mowing passes multiple times or expending more effort than usual, that’s a sign your lawn mower blade needs sharpening. Just do its job.
Inspect the blade: It should be sharp with no nicks, dents or rounded edges. Straight, sharp blades
Age of Blades: After mowing 20 – 25 hours, whether your blades seem dull or not, after that maintenance, If it is in a good state run at peak performance.
How to Keep Blades of Your Lawnmower Maintained
Materials Needed:
- Safety gloves and goggles
- Wrench or socket set
- Blade sharpening tool or file
- Blade balancer
- WD-40 or similar lubricant
Always Safety: Anyone thinks everything first and do in world to anything like sane, It means safety always come first. Disconnect spark plug wires so that accidental starting is not possible.
Tilt the Mower on Its Side: To prevent oil and gas from spilling when you tip back your mower, Leventhal says to do it with the carburettor facing up. You need a wrench or sock set for this blade bolt. Now that you know how to install the blade, slide it in correctly.
Clean the blade: You can clean up dirt or grass cuttings before sharpening it using a wire brush. It accelerates the filing process and addresses anything that may need correction.
As a pro tip: with the following tools, you should file-bench grinder Incline conservatively based on your current edge angle, which is usually 30-45 degrees. Go in one direction down the edge and gently press as you run it across.
Blade: Reattach the blade, put it back where you first found it and make sure that it is secure in its place. Tighten the bolt securely.
Maintenance Tips: Throughout the mowing season, do a periodic check beneath your mower every few weeks of operation (not a bad idea to coincide with before and after snowy weather to remove any accumulation).
If you do not want to maintain on your own lawnmower then worry about finding a gardener, who will fix it correctly and with high quality or ordering parts for production in Gardening Machinery Direct. Proper maintenance of your mower, including its sharpening, will significantly extend the life of this implement.
Read More: click here
