EPDM roofs can be installed when fully adhered, ballasted or mechanically attached. During the installation process, make sure you have the most experienced roofers for the job. It’s the best way to ensure that the installation is handled professionally. Here is a step-by-step guide on how to install EPDM roofs.
1. Start by laying out the first layer (membrane layer) and leave a lot of room for excess allowance depending on the type of surface.
2. Fold back the roof as you prepare for the adhesive.
3. Apply the right type of adhesive to the bottom layer of the membrane.
4. Make the edges of the membrane smooth using push brooms and rollers.
5. Seal the seams using caulk and special equipment.
What Are The Benefits Of EPDM Roofs?
1. Long Lifespan
EPDM roofs use extremely durable synthetic rubber roofing membranes so it has a lot of advantages. The main benefit is the long lifespan ranging between 30-50 years. Rubber roofs are very strong and often protect the building from extreme weather conditions.
2. Easy Cleaning And Maintenance
Compared to flat roofs, rubber roofs are easy to clean since there is no room for the growth of moss. Even if there is dirt, they can be easily cleaned. Therefore, you will not be spending too much money on the cleaning of your roof.
3. Environmentally Friendly
If you are looking for a sustainable roofing solution, you need to consider EPDM roofs. They are eco-friendly since they are made up of recycled materials.
What Are The Drawbacks Of EPDM Roofs?
1. More Expensive
They are costlier compared to other flat roofing options. The initial cost of set up may be higher and deter owners who are looking for budget-friendly options. However, you can apply for financing if you need help covering the costs.
2. More Room For Damages
During the installation process, you need to take extra safety measures in place to ensure there is no damage. Note that, EPDM roofs rely on a thin membrane that often becomes vulnerable to punctures often caused by foot traffic especially, on sharp objects. One of the best ways to avoid this drawback is by using more thick membranes. Also, if you are suffering from roofing problems prefer Commercial Roofing Repairs which is one of the best solutions for your home.
3. Require Extremely Careful Installation
If the surfaces are not completely flat, the rubber needs to be carefully cut to make sure there are no gaps that enable water penetration into the membrane. The best way to overcome this drawback would be to use flashing tape to get the most accurate measurements for placing EPDM. It’s a good idea to consult a professional team of roofers to avoid any hassles.
Final Thoughts
EPDM roofs have become quite popular over the last few years as a roof flashing solution. Therefore, you need to make sure you hire the right roofers if you are planning to install them. This way, you can rest assured that you will enjoy the best benefits of EPDM roofs without fail. Proper installation is the key to avoiding the noticeable drawbacks.
For more news click thebritaintimes.co.uk